SteelWall

Larssen

Cold formed

Pipe pile walls

DTH driving method

Pipe pile combi walls

H-pile walls

H-pile combi walls

Cell structures

Sealant

Larssen

Cold formed

Pipe pile walls

DTH driving method

MF DTH

Pipe pile combi walls

H-pile walls

H-pile combi walls

LPB (Larssen)

Cell structures

Connectors for Straight Web sheet piles

In the development of these connection systems, the main focus was on maximum safety and the longest possible lengths of the whole connector bar connection. Therefore the division in FSC-Center and the FSC-Leg connectors, because the weight decides the length. The lighter the weight per meter, the longer the connector bar. We can manufacture the FSC60-Center in a length of 9.5 m, the FSC90-Center in 10 m, the FSC120-Center in 11.2 m and the FSC-Leg connector even up to 18 m. To achieve the maximum tensile strength, the FSC-Leg connector bar must be fully welded to the FSC-Center connector bar on both sides in tension as shown on the data sheets.

The FSC-Center connector and the FSC-Leg connector can be purchased individually or completely assembled and welded ready for installation.

FSC60 + FSC Leg: Steel grade: S355J2; Steel thickness FSC60 Center: 16 mm; Steel thickness FSC Leg: 12.7 mm; Length FSC60 Center: 9.5 m; Length FSC Leg: 18 m; Weight FSC60 Center: 30.5 kg/m; Weight FSC Leg: 19.5 kg/m; Max. tensile strength: 5604 kN/m, (FEM); Data sheet (PDF); FEM simulation; DWG FSC60; DWG FSC Leg; Request this connector; Remember this connector

For Straight Web sheet piles
image_FSC60(0)_1765878951.png

FSC90 + FSC Leg: Steel grade: S355J2; Steel thickness FSC90 Center: 16 mm; Steel thickness FSC Leg: 12.7 mm; Length FSC90 Center: 10 m; Length FSC Leg: 18 m; Weight FSC90 Center: 29.2 kg/m; Weight FSC Leg: 19.5 kg/m; Max. tensile strength: 6129 kN/m, (FEM); Data sheet (PDF); FEM simulation; DWG FSC90; DWG FSC Leg; Request this connector; Remember this connector

For Straight Web sheet piles
image_FSC90(1)_1765879115.png

FSC120 + FSC Leg: Steel grade: S355J2; Steel thickness FSC120 Center: 16 mm; Steel thickness FSC Leg: 12.7 mm; Length FSC120 Center: 11.2 m; Length FSC Leg: up to 18 m; Weight FSC120 Center: 26.3 kg/m; Weight FSC Leg: 19.5 kg/m; Max. tensile strength: 6129 kN/m, (FEM); Data sheet (PDF); FEM simulation; DWG FSC120; DWG FSC Leg; Request this connector; Remember this connector

For Straight Web sheet piles
image_FSC12(0)_1765879201.png

Disclaimer

SteelWall connectors generally comply with the European standards and are manufactured by certified steel processing companies. All figures are approximate and may vary. Bar twists are possible up to 2 mm per metre. Tolerance of steel thickness ±0.04“ (±1 mm). Steel thickness can be reduced by up to 2 mm at connector ends. Length tolerance up to ±7.9“ (±200 mm). Degree details refer to the connector bar axes. We reserve the right to make technical changes. We refer to DIN EN 12063. Please check the sheet pile interlocks with a physical sample section of the desired connector for compatibility. Welding specifications are non-binding and must be checked and, if necessary, adjusted by the project or welding engineer.

Larssen

Cold formed

Pipe pile walls

DTH driving method

Pipe pile combi walls

H-pile walls

H-pile combi walls

Cell structures

Connectors for Straight Web sheet piles

Disclaimer

SteelWall

Legal advice

steelwall.eu

steelwallus.com

steelant.eu